Brief introduction of KK-5 series

Current location: > Products > Flying Saw > KK-5 Flying Cold Saw >
Flying cold sawing is a new online cutting technology in H.F. welded tube industry. Compared with the friction heat saw, the biggest advantage is that the end of the tube is smooth and without burr after cutting off. For high quality requirements, these is no need off-line second treatment. In addition, due to the use of servo tracking technology, cutting length accuracy is higher than the traditional friction flying saw. Dust and noise pollution are obviously reduced in the production process.
KK series flying saws from Kaikong company, is single saw in-feed type cold saw. This series includes 9 models, suitable for cutting steel tube/pipe with diameter from 6mm to 168mm and wall thickness from 0.3mm to 8mm during production. The pipe/tube material can be HR steel strip, CR steel strip, GI steel strip, copper, aluminum and zinc magnesium alloys. Blade can be made from high speed steel or alloy saw blade, cut tube/pipe with 300Mpa to 980Mpa tensile strength. Kaikong company possess all core technologies of cold cutting flying saw, both mechanical and electrical.
KK-5 series cold flying saw model list

Inquiry email: sales@kaikongcn.com


 
锯型号
Saw Type
切割范围
Diameter
mm
切割厚度
Thickness
mm
最高速度
Max Speed
M/min
总功率
Total
 Power
 
锯片直径Blade
mm
卡具形式
Clamp
20 Φ6~25 0.3~1.2 130 17KW 300 2Groups by Air
32 Φ8~38 0.3~2.0 120 19KW 350 2Groups by Air
50 Φ20~63.5 0.6~2.5 110 22KW 400 2Groups by Air
60 Φ25~76 0.8~2.5 90 25KW 400 2Groups by Air
76 Φ25~89 0.8~3.5 90 34KW 450 3 Groups by Air
89 Φ38~105 0.8~4.0 80 44KW 450 3 Groups by Hydr.
114 Φ48~114 0.8~4.0 70 46KW 560 3 Groups by Hydr.
127 Φ50~140 1.2~5.0 60 59KW 560 3 Groups by Hydr.
165 Φ76~168 2.0~6.0 60 63KW 630 3 Groups by Hydr.